LEDs

Kaimana LED Install
Kaimana Overview & Instructional Guide Overview The Kaimana LED Controller is a powerful new tool for those looking to get the most out of their...
Sat, Apr 23, 2016 at 10:58 PM
Kaimana Mini/UFB Install Video
Sat, Apr 23, 2016 at 11:32 PM
TE2 and TE2+ with the LVT3
Mad Catz made some minor changes to the ground planes in the TE2+ upgrade that they did not let us know about.  Because of this a simple transposition of ...
Thu, May 12, 2016 at 6:09 PM
5VDC RGB IL-lumination diagram
Thu, May 12, 2016 at 6:27 PM
RGB stick install for Kaimana Mini/Kameleon
I'll link the parts below. It's important to note that the Joystick LED needs to be the first LED in the chain from the Kaimana Mini. It goes Kaima...
Thu, Aug 9, 2018 at 2:43 PM
RGB LED Joystick w/ LVT3 TE2 or TE2+
First install the hallow Shaft and put the RGB LED wire through the shaft, LED still sticking through the top of the shaft. Then once the stick is install...
Sun, Jul 24, 2016 at 6:47 PM
Old LVT3 RGB LED Joystick Install Instructions *vague*
I believe you have the old version of the LVT3 which does not have screw terminals labeled V B R G. If you indeed do not have the screw terminals your opt...
Fri, Jul 29, 2016 at 3:42 PM
Kaimana Mini LED Install
OG Kaimana(OGK) VS. Kaimana Mini (KM) There are various differences aside from the very obvious, but for the sake of completeness we will list all of...
Thu, Jun 18, 2020 at 2:47 PM
OG Kaimana(OGK) VS. Kaimana Mini (KM)
The OGK and the KM are based off the same chipset so they run the same software and codebase. Below are the main differences between the OGK and the KM:...
Mon, Feb 27, 2017 at 7:40 PM
Kaimanas and Tournament Mode(Tmode)/Night Mode
Tmode is a function where LEDs in a fightstick are turned off. There are many ways to implement this but we have decided on enabling/disabling by holding bu...
Fri, May 19, 2017 at 6:06 PM