First install the hallow Shaft and put the RGB LED wire through the shaft, LED still sticking through the top of the shaft. Then once the stick is installed take the RGB LED wires and insert the screws into the small 4slot screw terminal towards the bottom side of your LVT3. The slots are labeled V = black wire B = Blue Wire R = red wire G = green wire. Once the color of wire is in its respective slot take a small screwdriver and twist down securing the wire. The RGB Wire can get tangled so be sure to untwist your joystick to alleviate the tangle every once in a while. Otherwise we recommend a slip ring which will allow your stick to spin and the RGB LED wires will never tangle.

Please let me know if you have any other questions.